Degradation PLA transparent film
Environmental Protection Biodegradable Plastic Film No Residual Heat Seal Transparent
| Thickness range | 30-100μm |
| Standard volume length | 2000m,4000m |
| Multiples of standard roll length available | 2,3,4 |
| Cutting width | according to customer needs |
| Core diameter | 76.2mm, 152.4mm |
| Number of connectors | Premiums allow one connector per roll.Under the standard length, the joint rate is controlled below 10% |
Polylactic acid, also known as polylactide, belongs to the polyester family.Polylactic acid is a polymer obtained by polymerizing lactic acid as a main raw material. The raw material source is sufficient and can be regenerated, and corn, cassava and the like are mainly used as raw materials.The production process of polylactic acid is non-polluting, and the product can be biodegraded to achieve circulation in nature, so it is an ideal green polymer material.
Polylactic acid has good thermal stability, processing temperature of 170~230 °C, good solvent resistance, and can be processed in various ways, such as extrusion.Spinning, biaxial stretching, injection blow molding.Products made from polylactic acid are biodegradable,Biocompatibility,Gloss, transparency, feel andHeat resistanceGood, it also has certain bacteria resistance, flame retardancy and UV resistance, so it is widely used, and can be used as packaging materials, fibers and nonwovens. It is mainly used in clothing (underwear, outerwear), industry (construction). , agriculture, forestry, papermaking, and health care.
Product introduction Bopla polylactic acid film is made of bio-based materials through special production process; it is divided into ordinary, heat-sealed, high-barrier and other products, suitable for various environmentally-friendly degradable materials.
The main purpose
Products are mainly used in the processing of packaging, electronics and other fields.
Performance characteristics
● Excellent printability ● Excellent transparency ● Uniform thickness
● Smooth and smooth surface ● Good mechanical adaptability
Standard
Thickness:20-120micron
Length:500-2000m
Cutting width: according to customer needs
Core diameter: 76.2mm
